The blanket drops onto the vehicle; the ground overlap beyond the footprint is measured along every side.
Vehicle
Length
Width
Height
Blanket
Width (across vehicle)
Length (along vehicle)
Mesh resolution
Acceptance criterion
Minimum overlap per side
Results
Side
Average
Minimum
Front
—
—
Rear
—
—
Left
—
—
Right
—
—
Waiting for the drop…
Overlap is sampled every 5 cm along each side, from the vehicle's ground footprint edge to the end of the blanket. The average of all stations is reported: positive = blanket extends beyond the footprint; negative = blanket falls short of the ground, following the vehicle profile. Minimum = the shortest horizontal reach of the blanket beyond the footprint edge along that side, whether or not the fabric touches the ground there. A side passes if its average overlap meets the required minimum. The red line marks the blanket's longitudinal centre line.
"Hold to tuck" presses the hanging part of the blanket into the corner between bodywork and ground while the button is held: let go to stop at any intermediate stage, press again to continue. The fabric lying on the vehicle is not touched and keeps its dropped shape; the skirt goes straight down the body side into the ground corner and then lies flat outward, with its length unchanged. Overlap is re-measured whenever you let go. "Release" lets it fall freely again.
Vehicles are generic smooth shapes (rounded body, greenhouse, wheels), not specific models; front = +Z. Length, width and height can be adjusted live (height scales the body above its underside; ground clearance and wheels stay the same). Overlap is measured from the vehicle's overall footprint (length × width at its widest points). The fabric is a mass-spring model: results are indicative and must be confirmed with a physical test.